VMT-X Series Vickers Hardnes Tester VMT-X Series Matsuzawa Hardness Tester Selangor, Malaysia, Kuala Lumpur (KL), Singapore, Seri Kembangan Service, Repair

VMT-X Series Vickers Hardnes Tester

Download Files

VMT-X_Series.pdf (2.58 MB)

Specification

		VMT-X7	VMT-X3	VMT-X1
Test force	-	9.807, 19.61, 29.42, 49.03, 98.07, 196.1, 294.2, 490.3 N 1 2 3 5 10 20 30 50 Kgf
	S	2.942, 4.903, 9.807, 29.42, 49.03, 98.07, 196.1, 294.2 N 0.3 0.5 1 3 5 10 20 30 Kgf
Loading mechanism		Automatic loading and releasing method
Turret		Automatic	Manual
Indenter approach		85µm/sec
Dwell time		5 ~ 99sec		5 ~ 30sec
Min. measuring unit		0.01µm (200X ~ 1000X), 0.02µm (100X)		0.01µm
Objective lens	-	10X
	S	10X, 20X		20X
Eyepiece lens		10X
Measuring microscope	Max. measuring length	100X :999.9µm(200X:600.0 µm)
	Magnification	100X (200X)
	Measuring type	Electronic		Mechanical
Data output		1. Centronics (standard) 2. RS232C - Output selectable RS232C or serial		-
Data memory		Max 999 test data		-
Hardness conversion		Possible in compliance with ASTM (E-140),JIS		-
OK/NG criteria		Upper and lower limits setting and HI/OK/LOW display		-
Statistical calculation		Data output and display: Max.value, Min.value, Dispersion(R), Mean value, Standard deviation.		-
RS232C communication line		1200/2400/4800/9600 bps Error detection, Parity select : even/non		-
Accuracy		ISO 6507-2, JIS B7725, JIS B7734, ASTM E-384
Max specimen height		250m
Max specimen depht		150mm
Weight		Test force standard type : about 55kg . S type : about 52kg
Power suply		Single phase AC100 ~ 240V 50/60Hz available for export models

Subscribe Newsletter